17
2.0 Channel Mini Soundbar
www.insigniaproducts.com
Mounting your soundbar on a wall (optional)
You will need (not included with your soundbar):
1 Select a location close to your TV and directly in front of the
viewing/listening position. For best sound quality, choose a location
where sound waves are not blocked by furniture or other obstacles.
2 If you are mounting your soundbar to drywall, use the stud finder to
find the studs and mark the locations.
3 Drill two 15/64” holes into the wall 11.4" (29 cm) apart and make sure
they are level.
Notes:
• Make all connections to your soundbar before mounting the soundbar on a
wall.
• If you mount your soundbar on a wall, you will not be able to use a USB
thumbdrive as a sound source.
• If you mount your soundbar on a wall, you must use right-angle cable
connectors for the RCA cable (AUX IN) connection.
Level
Stud finder
(optional for wood
stud installation)
Drill and
drill bit
Hammer
Screwdriver
Tape measure
Tape
Screws (2) - 9/16” (3.6 mm) self-tapping, at
least 1 1/8” (28.5 mm) long
Wall anchors (2)
To Next Page
Loading...
