19
2.0 Channel Mini Soundbar
www.insigniaproducts.com
Using your soundbar
This system lets you access four different sound sources, including
Optical, AUX IN (RCA), Bluetooth, and USB.
Listening to your soundbar
1 Press the (Power) button to turn on your soundbar. The power
indicator turns off.
2 Turn on the audio source device connected to your soundbar and
begin playback.
3 Press the button on the soundbar repeatedly to select the audio
source or press the selected source button on the remote control
until you hear sound from your soundbar.
4 Adjust the volume on your soundbar or the source audio device to a
comfortable level.
5 Press the (Power) button again to turn off your soundbar. The
status indicator lights red.
Maintaining your soundbar
Cleaning your soundbar
Notes:
• If you use the OPTICAL connection, you must change your device’s audio
output setting to “PCM” format. Refer to the manual you received with the
output device for additional information.
• Make sure that your sound source is set to output sound to the soundbar
(whichever connection method you choose). Refer to your device’s manual
for additional information.
WARNING: Continuous use of high volume sound may permanently damage
your hearing.
CAUTION: Only use a soft and clean rag to clean the outside of the soundbar.
Never clean it with chemicals, detergents, or abrasives.
To Next Page
Loading...
