Insignia NS-PFT30BK03 - STEP 2: Installing the Bottom Plate

www.insigniaproducts.com
12
STEP 2: Installing the bottom plate
You n e e d :
1 Install the bottom plate (L) with four M6 x 25 mm bolts (CC) using the Phillips screwdriver (FF), then tighten the bolts.
2 Tighten the bolts securing the support posts to the table top with the Phillips screwdriver (FF).
CC M6 × 25 mm bolt (4)
FF Phillips screwdriver (1)
L Bottom plate