Why is the burner flame low on my Insignia Outdoor Fireplace?
A low burner flame on your Insignia Outdoor Fireplace can be due to several reasons. It might be caused by low gas pressure, in which case you should turn the tank valve off and replace the tank. If the outdoor temperature is below 40º F (4º C) and the tank is less than 1/4 full, using a full tank may resolve the issue. Also, check the burner and orifices for any blockage.
What to do if my Insignia NS-PFT28BK3 Outdoor Fireplace burner won’t light?
If the burner on your Insignia Outdoor Fireplace won’t light, there are a few things you can check. First, if the propane tank is frosted over, wait until it warms up and becomes unfrosted. Also, ensure that there isn't a blockage in an orifice. Finally, make sure that the control knob is in the ON position.
How to remove carbon build-up or thick black smoke from Insignia NS-PFT28BK3?
Carbon build-up or thick black smoke from your Insignia Outdoor Fireplace may be caused by dirt or film on the burner, so cleaning the burner may help. Alternatively, there could be a blockage in the burner. Remove any blockage and clean the burner inside and out.
Precautions regarding fire and explosion risks, clearances, and flammable materials.
Dangers of carbon monoxide and necessary precautions for safe operation.
Crucial details on handling, storage, and connection of propane tanks.
Instructions for attaching the base plate and feet to the side panels.
Instructions for placing and securing the burner unit.
Procedure for connecting and securing the propane tank.
Method for checking gas connections for leaks using a detection solution.
Step-by-step instructions for igniting the fire table.
Solutions for common problems encountered with the fire table.
General| Brand | Insignia |
|---|---|
| Model | NS-PFT28BK3 |
| Category | Outdoor Fireplace |
| Language | English |
To Next Page
