www.insigniaproducts.com
25
28" Square Fire Table - Black
4 After your fire table lights, release the control knob.
5 Push in and turn the control knob to the HIGH position and leave it there for five minutes or more before turning the
knob to the temperature setting you want.
6 If the burner flame goes out, turn off your fire table. Wait at least five minutes or more to let the gas dissipate, then
repeat steps 2 to 4.
Adjusting the flame
The burner flame should be blue with straight yellow tops. The flames should not be all yellow or produce thick black
smoke, indicating an obstruction of airflow through the burners. If your fire table has an all yellow flame, turn it off and
consult Troubleshooting your fire table
on page 27.
• Turn the control knob clockwise to increase the flame or counter-clockwise to decrease the flame.
Turning off your fire table
1 Push in the control knob and turn it clockwise to the OFF position.
2 Turn the gas tank valve clockwise until it stops.
O
F
F
H
G
I
H
L
O
W
E
T
I
N
G
I
2 in.
1 in.
0 in.
2 in.
1 in.
0 in.
Normal flame Abnormal flame