www.insigniaproducts.com
11
28" Square Fire Table - Black
Assembling your fire table
STEP 1: Attaching the bottom plate and feet
You need:
1 Attach the bottom plate (M) to the left and right side panels (E and L) with four M6 x 12 mm bolts (AA). Make sure that
the center ring on the bottom plate (M) is positioned closer to the left side panel with holes on it (E). Tighten with the
Phillips screwdriver (FF).
CAUTION: We recommend that you get assistance during the assembly process to avoid strains or injury, or damage to the fire table
parts.
Note: Before you begin to assemble your fire table, make sure that all parts are present. Compare the parts with the package contents
list and hardware contents above. If any part is missing or damaged, do not attempt to assemble your fire table. Contact customer
service for replacement parts.
AA M6 × 12 mm bolt (4)
FF Phillips screwdriver
E left side panel
M bottom plate
L right side panel
I feet (4)
Top of your fire table
Bottom of your fire table
To Next Page
Loading...
Need help?
General
