Insignia NS-PFT28BK3 - STEP 2: Attaching the back panel

www.insigniaproducts.com
13
28" Square Fire Table - Black
STEP 2: Attaching the back panel
You need:
1 Turn the unit upright, then attach the back panel (K) to the left and right side panels (E and L) with four M6 x 12 mm
bolts (AA). Tighten the bolts with the Phillips screwdriver (FF).
AA M6 × 12 mm bolt (4)
K back panel
FF Phillips screwdriver
Bottom of your fire table