www.insigniaproducts.com
26
Adjusting the flame
The burner flame should be blue with straight yellow tops. The flames should not be all yellow or produce thick black
smoke, indicating an obstruction of airflow through the burners. If your fire table has an all yellow flame, turn it off and
consult Troubleshooting your fire table
on page 29.
• Turn the control knob clockwise to increase the flame or counter-clockwise to decrease the flame.
Turning off your fire table
1 Push in the control knob and turn it clockwise to the OFF position.
2 Turn the gas tank valve clockwise until it stops.
2 in.
1 in.
0 in.
2 in.
1 in.
0 in.
Normal flame Abnormal flame
To Next Page
Loading...
Need help?
General
