Name: Insignia NS-PFT30BK03
Brand: Insignia
Rating: 4 (1 reviews)

To Next Page

To Previous Page

www.insigniaproducts.com

4 Place the burner assembly (B) into the square cutout in the table so that the four screw holes in the burner assembly

align with the holes in the square cutout in the table and the control panel fits in the square opening in the side of the

table.

5 Secure the burner assembly (B) to the table with four STA4.2 x 9.5 mm screws (AA), then tighten the screws with the

Phillips screwdriver (FF).

Questions and Answers:

Need help?

Do you have a question about the Insignia NS-PFT30BK03 and is the answer not in the manual?

Insignia NS-PFT30BK03 Specifications

General