EasyManuals Logo

Insignia NS-RBM11SS2 User Manual

Insignia NS-RBM11SS2
22 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #15 background imageLoading...
Page #15 background image
www.insigniaproducts.com
15
NS-RBM11SS2/NS-RBM11SS2-C/NS-RBM11WH2/NS-RBM11WH2-C
Quick Cool mode
Quick cool mode helps to lower the temperature quickly.
1 Press and hold the SET button for three seconds. LEDs 2 and 3 turn on and the refrigerator enters quick cool mode.
2 To cancel quick cool mode, press the SET button again.
Setting the freezer temperature
The freezer temperature controller is located behind the fridge crisper, remove the crisper to gain access to the freezer
controller when you need to adjust the freezer temperature.
Slide the freezer temperature control slider to select a freezer temperature.
For the coldest setting, slide the control slider to the left.
Removing and inserting the glass shelves
1 Lift the front half of the shelf up and lay it on the back of the shelf.
2 Lift up and pull the shelf out.
3 To replace the shelf, slide it into the compartment, then lower it into position.
Adjusting the refrigerator shelves
The shelves inside the refrigerator and freezer compartments are adjustable.
1 Open the refrigerator or freezer compartment door all the way.
Slider
Recommended
Cold
Coldest
Shelf

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Insignia NS-RBM11SS2 and is the answer not in the manual?

Insignia NS-RBM11SS2 Specifications

General IconGeneral
BrandInsignia
ModelNS-RBM11SS2
CategoryRefrigerator
LanguageEnglish

Related product manuals