www.insigniaproducts.com
11
18.6 Cu. Ft. Bottom Mount Refrigerator
5 Remove the three screws that secure the center hinge to the refrigerator, then remove the center hinge. Save the
screws to reuse.
6 Remove the sleeves and hole caps from the refrigerator door, then install them in the opposite side of the door.
7 Take the left-side self-locking block and stopper from the accessory bag and install them in the bottom left side of the
refrigerator door as shown below.
Sleeve
Door
stopper
Self-locking
block
Sleeve
Door
stopper
Self-locking
block
To Next Page
Loading...
