EasyManua.ls Logo

Insignia NS-RFD26XSS3 - Freezer Drawer Maintenance; Removing Freezer Drawer Components

Insignia NS-RFD26XSS3
40 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
www.insigniaproducts.com
18
6 Repeat steps 1 through 5 to replace the other door.
7 Using the three screws removed earlier, reinstall the top hinge cover and control panel to the top of the cabinet.
Removing and replacing the front of the freezer drawer
Removing the freezer drawer
1 Slide open the freezer upper drawer to its full extension.
2 Slide open the freezer lower drawer to its full extension.
3 Remove the freezer upper drawer from the glide rails by lifting up and pulling out at an angle.
4 Remove the freezer lower drawer by lifting upward at an angle.
Hinge cover
Lower freezer drawer

Related product manuals