www.insigniaproducts.com
33
25.4 Cu. Ft. French Door Refrigerator
5 Pull out the water filter tray, then empty the tray. Dry around the filter opening, then put the tray back in.
6 Insert the new water filter into the water filter holder.
7 While turning the new filter clockwise, push it all the way into the holder until it locks into place.
8 Turn on the water supply, then run water through the dispenser until the water runs clear (about 6–7 minutes). This
cleans the water supply system and removes any trapped air.
9 Open the refrigerator door and make sure that no water leaks from the water filter.
10 After you install the new filter, press and hold both the On/Off and Super Freeze buttons for about three seconds to
turn off the icon.
To Next Page
Loading...
