18
www.insigniaproducts.com
16 Remove the screw caps on the door handles, then remove the four hex-head
screws with the hex wrench. Lift the handles off the Phillips-head screws.
17 Remove the hole caps from right side of the door and save them to be reused.
18 Remove the four Phillips-head screws from the left side of the door and install
them into the holes on the right side of the door.
19 Hang the handles on the Phillips-head screws, then secure with the hex-head
screws you just removed. Tighten with the hex wrench and replace the screw
caps.
20 Install the hole caps you removed from right side of the door into the left side
of the door.