Insignia NS-SB515 User Manual

11
Insignia Soundbar with Wireless Subwoofer
www.insigniaproducts.com
Second step - Connecting your soundbar
Digital Optical connection (best)
1 Connect one end of the digital optical cable (not included) to your
soundbar. Connect the other end into the Digital Optical Output port
on your audio source device.
Audio
Quality
Jack Type Cable
Best
Digital Optical cable (not included).
See “Digital Optical connection (best)” on page 11.
Good
RCA audio cable (included). See “RCA
connection (good)” on page 13.
Good
3.5 mm audio cable. See “3.5mm
connection (good)” on page 13.
Note
If you use the OPTICAL connection, change the
device’s audio output to “PCM” format. Refer to the
manual you received with the output device for
additional information.
DIGITAL
OPTICAL
OUTPUT
Digital optical cable
(not included)
Backpanel of the soundbar
Audio source (e.g. TV,
Blu-ray, or cable box)
NS-SB515_15-0527_MAN_V3_ENG.fm Page 11 Friday, July 24, 2015 10:21 AM

Insignia NS-SB515 Specifications

General

Brand	Insignia
Model	NS-SB515
Category	Stereo System
Language	English