OR 3.5 mm connection (GOOD)
1. Connect the red and white RCA connectors on the RCA audio cable connectors to the AUX IN jacks
on your soundbar, then connect the other end to the 3.5 mm jacks on the RCA adapter (included).
2. Connect the other end of the adapter to the headphone or AUX Output on your audio source
device.
3. Press the (sound source selector) button on your soundbar or the SOURCE button on the
remote control repeatedly until the source indicator turns yellow.
USB connection
Note: If you mount your soundbar on a wall, you will not be able to use a USB flash drive as a sound
source.
To Next Page
Loading...
