3
Stereo Receiver with Bluetooth
www.insigniaproducts.com
Features
Front controls
# Item Description
1 ON/STANDBY button Press to turn on your stereo receiver or to put
it in standby mode.
2 STANDBY indicator Lights red when your stereo receiver is in
standby mode.
3 Bluetooth indicator
• Blinks when your stereo receiver is in
pairing mode and “PAIRING” is shown on
the display.
• Lights when your stereo receiver is
connected via Bluetooth, and
“CONNECTED” is shown on the display.
4 Remote sensor Receives the signal from the remote control.
5 Display Provides information about the receiver.
6 MEMORY button Press to save a station preset.
Press and hold to automatically search for
FM stations and store them in memory.
7 TUNE/PRESET button Press to toggle between tune and preset
mode.
8 / buttons Does one of the following, depending on the
mode selected:
• In TUNE mode, tunes the receiver up or
down or searches for the next or previous
station. See page 11.
• In MEMO mode, stores stations to the
selected preset number. See page 11.
• In PRESET mode, selects the preset station
you want. See page 12.
• In BLUETOOTH playback mode, skips or
searches forward or back. See page 14.
9 INPUT button Press to cycle through the available input
options. Options are in the following order:
FM>AM>CD>AUX 1>AUX 2>AUX 3>BT
(Bluetooth) AUDIO>.
10 Headphone (PHONES) jack Plug 1/4” stereo headphones into this jack.
11 AUX3 jack Connect a portable audio device, such as an
MP3 player, to this jack.
12 VOLUME control knob Turn to increase or decrease the volume.
# Item Description
NS-STR514_16-0462_MAN_V2_ENG.book Page 3 Monday, November 21, 2016 12:48 PM
To Next Page
Loading...
Need help?
General
