9
Stereo Receiver with Bluetooth
www.insigniaproducts.com
Installing batteries
1 Remove the cover.
2 Insert two AAA batteries into the compartment
matching the polarity indicated.
3 Replace the cover.
Using the remote control
Use the remote control by pointing it towards the
receiver’s remote sensor window. Objects between
the remote control and sensor window may
prevent proper operation.
Use the remote control within about 23 feet
(7 meters) of the receiver and within 30 degrees of
perpendicular to the front of the receiver.
Caution
• Always use alkaline batteries and never use
rechargable batteries (such as Ni-Cd).
• When the batteries are exhausted, remove them
and replace them with new ones as soon as
possible.
• If the batteries are replaced incorrectly, it can
cause damage to your remote control.
• Remove the batteries if the remote control will
not be used for a long period of time.
• Do not leave the remote control in a hot or
humid place.
• Do not handle and store the batteries with
metallic tools.
Cautions
• Do not expose the remote control to shock. In
addition, do not expose the remote control to
liquids, and do not place in an area with high
humidity.
• Do not place the remote control under direct
sunlight. The heat may cause deformation of
the remote control.
• The remote control may not work properly if the
remote sensor window of the receiver is under
direct sunlight or strong lighting. In such a case,
change the angle of the lighting or receiver, or
operate the remote control closer to the remote
sensor window.
STEREO RECEIVER
NS-STR514
ON/STANDBY
VOLUME
PHONES AUX 3
MEMORY TUNE/PRESET INPUT
STANDB Y Bluetooth
NS-STR514_16-0462_MAN_V2_ENG.book Page 9 Monday, November 21, 2016 12:48 PM
To Next Page
Loading...
Need help?
General
