EasyManua.ls Logo

Insignia NS-UZ14XSS8 - Control Panel and Specifications; Control Panel Troubleshooting; Technical Specifications

Insignia NS-UZ14XSS8
21 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
18
NS-UZ14XSS8
www.insigniaproducts.com
Control panel
Specifications
The compressor turns
on and off frequently.
The room temperature is hotter
than normal.
This is normal.
You have just added a large
amount of food to the freezer.
Allow time for the new food to cool, then check again.
The door is not closed
completely or was opened too
often.
Check the door gasket and food distribution and make sure that
the door closes completely.
The freezer has recently been
disconnected for a period of
time.
Allow time for the freezer to cool before adding food. Four hours
are required for the freezer to cool down completely.
The thermostat was not set
correctly.
Set the thermostat to the correct setting.
PROBLEM POSSIBLE CAUSE POSSIBLE SOLUTION
The control panel is
unresponsive
The control panel is locked. Press and hold the Lock button for three seconds to unlock the
control panel.
I got an alert that the
door is open
The door is open. Close the door.
Make sure that nothing is blocking the door.
Make sure that the freezer is level.
I got an alert that the
temperature is out of
range
Warm foods may have recently
been added to the freezer.
Wait for the foods to cool.
The temperature is set too high
or too low.
Adjust the temperature.
The room that the freezer is
located in is too warm.
Wait for the room temperature to drop.
Dimensions (WxDxH) Outer (with handle) - 28 x 32 x 62 in. (71.1 x 81 x 157 cm)
Weight 160.9 lbs. (73 kg)
Power requirements 115 V ~ 60 Hz
Current 1.8 A
Power Power consumption: 394 Kwh/year
Power cord length 65 in. (165 cm)
PROBLEM POSSIBLE CAUSE POSSIBLE SOLUTION

Related product manuals