6
Insignia 5.8 Cu.ft. Upright Freezer
www.insigniaproducts.com
Exterior
Setting up your freezer
Before using your freezer
• Remove the exterior and interior packing, especially the foam packing
between the outside condenser and the cabinet.
• Let the freezer stand upright for approximately two hours before
connecting it to power. This reduces the possibility of a malfunction in the
cooling system from improper handling during transportation.
• Wash the inside with a damp, warm cloth and a baking soda solution (two
tablespoons in a quart of water), then wipe dry with a dry cloth. Do this
periodically to keep your freezer looking new.
Top
Door
Leveling leg
Tem pe rat ur e
control
NS-UZ58WH6-NS-UZ58WH6-C_15-0902_MAN_V4_ENG.fm Page 6 Wednesday, November 25, 2015 3:15 PM
To Next Page
Loading...
Need help?
General