10
Insignia NS-LTDVD19-09 19” LCD TV/DVD Combo
www.insignia-products.com
Setting up your TV
Connecting an antenna, cable TV, or
satellite TV
To connect an external antenna, cable TV, or
satellite TV:
1 Plug the antenna cable (2) from an antenna,
cable TV, or satellite receiver (3) to the
ANT.INPUT jack on your TV (1).
2 Turn on your TV.
3 Press INPUT, then press / to select TV.
Connecting a standard video device
To connect a standard video device to the AV
jacks:
1 Plug an RCA video cable (2) into a standard
video source (5) and into the VIDEO jack on
the back of your TV (1).
2 Plug the RCA audio cables (4) into the video
device's audio output jack and into the upper
AUDIO L and AUDIO R jacks on the back of
your TV (1).
3 Turn on your TV.
4 Press INPUT, then press / to select AV.
To connect a standard S-Video device to AV
jacks:
1 Plug an S-Video cable (3) into the S-Video
out jack on an S-Video device (5) and into the
S-VIDEO jack on the back of your TV (1).
2 Plug RCA audio cables (4) into the S-Video
device audio output jacks and into the AUDIO
L and AUDIO R jacks on the back of your TV
(1).
3 Turn on your TV.
4 Press INPUT and / to select S-Video.
Connecting a component video device
To connect a progressive-scan or HDTV
video source to Y/Pb/Pr jacks:
1 Plug a component video cable (2) into the
progressive-scan or HDTV video device (3)
and into the Y/Pb/Pr jacks on the back of
your TV (1).
2 Plug the RCA audio cables (4) into the audio
out jacks on progressive-scan or HDTV video
device and into the lower AUDIO L and
AUDIO R jacks on the back of your TV (1).
3 Turn on your TV.
AUDIOVGA INPUT
CB / PB
Y
CR / PR
COAXIAL
LRAUDIO
HDMI INPUT
INPUT OUTPUT
LR AUDIO
LR AUDIO
VIDEO
S-VIDEO
ANT. INPUT
INPUT
FOR
SERVICE
ONLY
AC INPUT
~ 100-240V 50/60Hz
AUDIOVGA INPUT
C
B /
P
B
Y
C
R /
P
R
COAXIAL
LR AUDIO
HDMI INPUT
INPUT OUTPUT
LR AUDIO
LRAUDIO
VIDEO
S-VIDEO
ANT. INPUT
INPUT
FOR
SERVICE
ONLY
1
2
3
1
AC INPUT
~ 100-240V 50/60Hz
3
4
5
2
1
AC INPUT
~ 100-240V 50/60Hz
3
4
2
To Next Page
Loading...
