Flow 2 Pro User Manual
If you cannot connect via NFC, please check the following:
1. Ensure the NFC area on your phone is close to the NFC mark on Flow 2 Pro. If there is no
response, move the phone a few millimeters away, wait for around 10 seconds, then try again.
2. Ensure your phone has NFC enabled.
3. Remove any metal objects in close proximity to Flow 2 Pro's NFC area.
4. Ensure only one phone is in contact with Flow 2 Pro at a time.
5. Turn off any other NFC-enabled applications running on your phone.
To Next Page
Loading...
