Flow 2 Pro User Manual
Charging
Use the included Type-C Cable to connect the "IN" Port on the handle to the charger. The battery
level indicator lights will change during charging according to the remaining power level. A solid
indicator light means charging is complete.
Flow 2 Pro features two Type-C ports. The "IN" Port on the handle is the charging port, which is used
to charge the gimbal. The "OUT" Port located on the arm is the power output port. To use the gimbal
as a power bank, connect your phone and when the gimbal is powered off, press the Power/M
Button to charge your phone. If the gimbal is already on, it will start charging automatically.
Flow 2 Pro Charging Time
：
• 0–80% in 55 minutes
• 0–100% in 80 minutes
*Measured at 77ºF (25℃) using a 10W charger.
To Next Page
Loading...