Flow 2 Pro User Manual
Unfolding and Folding
Mounting a Phone
Attach the Phone to the Magnetic Clamp
• Extend the Magnetic Phone Clamp around the middle of your phone, following the icon on the
clamp's right side.
• Ensure the phone's camera faces the direction marked on the Magnetic Phone Clamp.
Attach the Clamp to the Gimbal
• Align the magnetic notch on the back of the clamp with the raised bump on the gimbal's
magnetic surface.
• Match the magnetic groove on the clamp with the red dot (Magnetic Alignment) on the gimbal.
Securely attach the clamp.
Unfold and Power On
• Hold the handle with one hand and pull the arm outward with the other to unfold the gimbal.
• The gimbal powers on automatically. Wait for the indicator light to turn on, signaling it's ready
for use.
Note:
• Ensure the Magnetic Phone Clamp is centered on your phone for an even, secure fit. Attach the
clamp to the phone first before mounting it on the gimbal.
• The phone's camera should match the direction marked on the clamp for proper alignment.
• If the light is solid red and the gimbal isn't functioning, double-check the Magnetic Phone
To Next Page
Loading...