Flow 2 Pro User Manual
Manual Rotation
a. You can manually adjust the direction of the roll axis by moving the gimbal. When the
angle of the mobile phone clamp is less than 30º, the gimbal will rotate to the position where it
is swung.
b. The gimbal can be rotated horizontally or vertically by turning it. When the angle of the
mobile phone clamp to the gimbal exceeds 30°, the gimbal will automatically rotate to the next
90° position according to the current rotation direction.
Note: The gimbal cannot rotate in four directions. It can only rotate horizontally or vertically in a
fixed direction. If forced to move, the motor might stall and consume more power.
To Next Page
Loading...