Insta360 Flow 2 Pro - Page 25

Flow 2 Pro User Manual
23
Battery Level/Gimbal Mode Indicators
Gimbal Status
Operation
Descriptions
Powered off
Single Press
Power Button
• Check current battery level.
Powered on
Single Press
Power Button and
the Trigger
Button
• Check current battery level.
/
• Shows current gimbal mode: AUTO = Auto, F =
Follow, PF = Pan Follow, FPV = FPV.
LED Indicator Lights Status
All four LEDs blink slowly when Flow 2 Pro is in Standby Mode.
All four LEDs blink quickly when an error has occurred. The two most common reasons are:
• Flow 2 Pro is physically prevented from moving or is experiencing a technical error. Remove
any obstacles, then press any button.
• The phone is not centered or secure in the phone clamp. This may lead to abnormal motor
heating and trigger Flow 2 Pro's overheating protection. Please recenter and secure the phone.