instantpot.com | 11
Get started
Initial set up (It won't bite!)
You — yes, you — can do this!
01 Pull that Duo Crisp out of the box!
Always use a stainless-steel inner pot, not the non-stick ceramic coated variety, with
the air fryer lid.
02 Remove the packaging material and accessories from in and around the cooker and
make sure all the parts are accounted for. See Product, parts and accessories for a full
parts breakdown.
Make sure to check under the inner pot!
03 Wash the inner pot in a dishwasher or with hot water and dish soap. Rinse it well with
warm, clear water and use a soft cloth to thoroughly dry the outside of the inner pot.
04 Wipe the heating element with a soft, dry cloth to make sure there are no stray
packaging particles left in the cooker base.
Don’t remove the safety warning stickers from the lid or the rating label from the back
of the cooker base.
05 You may be tempted to put the Duo Crisp on your stovetop — but don’t do it! Place
the cooker base on a stable, level surface, away from combustible material and
external heat sources.
Is something missing or damaged?
Get in touch with a Customer Care Advisor through our chat widget at instantpot.com/#chat,
by email at support@instantpot.com or by phone at 1-800-828-7280.
WARNING
Read the Important
safeguards before using
the appliance. Failure
to read and follow those
instructions for safe use
may result in damage
to the appliance,
property damage or
personal injury.
Do not place the
appliance on a stovetop or
upon another appliance.
Heat from an external
source will damage the
appliance.
Do not place anything on
top of the appliance, and
do not cover or block the
steam release valve or
anti-block shield, located
on the appliance lid.
To Next Page
Loading...
Need help?
General
