Instant Pot IP-LUX60 V3 User Manual

20
Troubleshoong Table (Connued)
Possible Reason Soluon
Problem
9
8
Display remains
blank aer con-
necng the power
cord
Bad power connecon or no
power.
Inspect the power cord to
ensure a good connecon,
check the power outlet is
acve.
Cooker’s electrical fuse has
blown
Contact support online
9
All LEDs
ash with
a code
appearing
on screen
C1
code
Faulty temperature sensor
(cannot be detected)
Contact support online
C2
code
Faulty temperature sensor
(short circuited)
Contact support online
C5
code
Temperature is too high
because inner pot is not
placed into the cooker base
Insert the inner pot properly
Temperature is too high
because there is no water in
inner pot
Put food and water in the
inner pot
C6
code
Faulty pressure sensor Contact support online
10
Rice half cooked or
too hard
Too lile water
Adjust dry rice and water
rao according to recipe
Cover opened prematurely
Aer cooking cycle
completes, leave the cover
on for 5 more minutes
11 Rice too so Too much water
Adjust dry rice and water
rao according to recipe
12
Intermient beeping
aer the cooker
starts for a while
Indicaon of overheang. The
cooker has reduced the
heang temperature, and may
not reach cooking pressure
Starch deposits at the boom
of the inner pot might have
clogged heat dissipaon. Stop
the cooker and inspect the
boom of the inner pot
13
Occasional cking or
light cracking sound
The normal sound of power
switching and expanding
pressure board when changing
temperature
Nothing to be worried about
Boom of the inner pot is wet.
Wipe boom of the inner pot
dry before cooking

Instant Pot IP-LUX60 V3 Specifications

General

Brand	Instant Pot
Model	IP-LUX60 V3
Category	Electric Pressure Cooker
Language	English