instanthome.com | 17
Pairing with the Instant Pot App
You can control your Pro Plus with the Instant Pot App using
your mobile device.
To download the App, either:
• Scan the QR code, or;
• Visit www.instanthome.com/app, or;
• Search “Instant Pot” in the Apple Store or the Google Play Store.
To get started, you'll need to create an account.
Requirements for pairing
You can use these compatible mobile devices to pair via WiFi.
• Android version 5.0 or later
• iOS version 12.0 or later
The Instant Pot can only connect to a 2.4GHz WiFi network.
Follow the steps below to start the pairing process.
Before you start, make sure you:
• Download the Instant Pot App and create an account if you don't
already have one
• Know your home WiFi network name and password
• Make sure your Pro Plus is plugged in and not currently cooking.
It should display OFF.
• Make sure you have your mobile device near the Pro Plus.
01 Open the App and select the Kitchen section, then select Add
an Appliance.
02 From the list of appliances, select "Instant Pot Pro Plus".
03 Follow the instructions in the App to start the pairing process.
When you're done, you're set to control your Pro Plus from your
App, and take advantage of even smarter, easier cooking!
Note: The Initial Water Test run can be done using the mobile
app. Ensure the device is connected using the steps above
before starting the test.
112-0124-01-0101_IB_Pro-Plus_Interim_GSG_FINAL.indd 17112-0124-01-0101_IB_Pro-Plus_Interim_GSG_FINAL.indd 17 7/9/21 1:58 PM7/9/21 1:58 PM
To Next Page
Loading...
Need help?
General
