14
User Manual
INITIAL SETUP
Clean before use
1. Wash the inner cooking pot with hot water and soap. Rinse and use
a soft cloth to dry the outside. Or you can wash the inner cooking
pot in the dishwasher.
2. Wipe the heating element inside the cooker base with a soft cloth
to ensure there are no stray packaging particles.
Setting up the condensation collector
The condensation collector sits at the back of the cooker base and
accumulates overflow moisture from the condensation rim. It should be
installed before cooking, then emptied and rinsed out after each use.
Remove the condensation collector
• Pull the condensation collector away from the cooker base; do
not pull down.
Note the tabs on the cooker base and the grooves on the condensation collector.
To Next Page
Loading...
Need help?
General
