COOKING
36 | support@instantpot.com.au | 1800 251 643
STEAM
The Steam programme works like a regular stovetop steamer, boiling liquid in the inner
pot to cook food with hot steam. When steaming, use the stainless steel steam rack to
keep food out of the boiling liquid.
Smart
Programme
Default time Time range
Default
temperature
Steam
10 minutes
(00:10)
1 minute to 1 hour
(00:01 to 01:00)
98°C
Not adjustable.
CAUTION
The inner pot and accessories will be hot during and after cooking. Always use
appropriate hand protection when adding to or removing food from a hot inner pot
to avoid personal injury and/or property damage.
NOTICE
The lid is removable throughout the cooking process for easy access. The product
keeps releasing steam under steam mode to avoid pressure building inside the
inner pot.
NOTICE
If there is steam in the inner pot, you may notice some resistance when re-placing
the lid. Allow the lid to settle into the track completely before closing it.
01 Add water to the inner pot.
02 Insert the inner pot into the multicooker base.
03 Place and close the pressure cooking lid as described in Pressure control features:
Pressure cooking lid.
04 Touch Steam.
05 Turn the dial to adjust the cooking time.
06 Press Start to begin.
The display shows On and the cooking progress bar shows Pre-heating.
07 When the Pro Plus reaches the target temperature, the progress bar moves over to
Cooking and the timer counts down.
08 When the Smart Programme finishes the display shows End.
Automatic Keep Warm cannot be used with Steam.
A delay start timer can be set to automatically start steaming while you're in bed,
working, running errands or busy with other dishes. To set a delay start timer,
see Control panel: Settings.
To Next Page
Loading...
