4
Get Started
5
Get Started
Reset Smart Programs to original settings
Reset individual Smart Programs
1. With the cooker in Standby mode, press and hold one of the Smart
Program buttons until the cooker returns to Standby.
Reset all Smart Programs
2. With the cooker in Standby mode, press and hold the
Control Dial until the cooker beeps.
All Smart Program cooking times and temperatures are restored
to the factory default setting.
Cancel active cooking program
You can cancel any cooking program at any time.
• While in Standby, Preheating or active cooking program, press
Cancel. Depending on the temperature of the unit, the internal fan
may keep running to cool the unit.
Turning cooking light On/Off
• To turn the light on, press Light.
• To turn the light off, press Light again. The cooking light cannot be
turned off in the last 60 seconds of a cooking program.
Replace filter indicator
• When it’s time to replace the OrdorErase filter, the display will show
Change Filter. See page 15 for replacement instructions.
Turning sound On/Off
• While in Standby mode, press and hold Temp/Time and Light
for 5 seconds, until the display shows Sound Off or Sound On.
Audible safety alerts (beeps) cannot be turned off.
Choosing temperature unit
Choose which cooking temperature unit you would like to use,
Fahrenheit or Celsius.
• While in Standby mode, press and hold Temp/Time for
5 seconds, until display shows
°
F or
°
C.
Save custom settings
You can set and save custom time and temperature settings for any of
the six Smart Programs.
1. Select the Smart Program you want to set.
2. Press Temp/Time button and use the Control Dial to change the
temperature
3. Press Start Button to confirm change.
To Next Page
Loading...
Need help?
General
