6
Get Started
7
Get Started
INITIAL SET UP
Unpack
1. Remove your new Vortex Plus from the box.
2. Remove all the packaging material from in and around
the air fryer.
3. Make sure to remove all the accessories from inside the cooking
chamber.
4. Don’t remove the safety warning stickers or the rating label from
the air fryer.
Clean before use
1. Wipe the interior with a damp cloth. Use a clean, soft cloth
to dry.
2. Wash the accessories with hot water and dish soap. Rinse
with warm, clear water and use a soft cloth to dry.
Placement
1. Place your Vortex Plus on a stable, level surface, away from
combustible material and external heat sources. Do not place your
Vortex Plus on top of another appliance.
2. Make sure to leave at least 5 in / 13 cm of space above and around
all sides of the appliance to allow for sufficient air flow.
Test run
Before using your new Instant Vortex Plus for the first time, you must
perform a test run to ensure everything is working correctly.
To perform a test run:
1. Follow the instructions for cooking on page 10.
2. Insert the cooking basket, but do not add food.
3. Select the Air Fry program.
4. Select the default cooking temperature (400
°
F / 205
°
C).
5. Select the default cooking time (18 minutes).
6. When the display shows Add Food, just remove and reinsert the
cooking basket (do not add any food).
7. When the display shows Turn Food, wait 10 seconds for the program
to resume.
8. After the cooking program ends, allow the unit to cool down.
Now you’re ready to cook a meal in your Instant Vortex Plus!
To Next Page
Loading...
Need help?
General
