9
User Manual
INITIAL SET UP
Unpack
1. Remove your new air fryer from the box.
2. Remove all the packaging material from in and around the air fryer.
3. Make sure to remove all the accessories from inside the air fryer.
4. Don’t remove the safety warning stickers or the rating label from
the air fryer.
Clean before use
1. Wipe the interior with a damp cloth. Use a clean, soft cloth to dry.
2. Wash the accessories with hot water and dish soap. Rinse with
warm, clear water and use a soft cloth to dry.
Placement
1. Place your air fryer on a stable, level surface, away from
combustible material and external heat sources. Do not place your
air fryer on top of another appliance.
2. Make sure to leave at least 13 cm of space above and around all
sides of the appliance to allow for sufficient air flow.
Test run
Before using your new air fryer for the first time, perform a test run to
ensure everything is working correctly.
To perform a test run:
1. Insert the basket and cooking tray into the air fryer, but do not
add food.
2. Select the Air Fry cooking programme on the Control Panel.
3. Single Zone cooking activates by default.
To learn more about Single Zone and Dual Zone cooking, see “Introduction
to Zone Cooking” below.
To Next Page
Loading...
Need help?
General