Instantel Micromate User Manual (English)

Other manuals for Instantel Micromate

Owner's Manual156 pages

Instruction Sheet4 pages

Quick Reference Guide2 pages

Technical Note8 pages

Questions and Answers:

A
Ann MaynardSep 6, 2025
How to fix Transverse channel fails sensor check in Instantel Micromate?
- D
  Dustin MorganSep 6, 2025
  If the Transverse channel fails the sensor check on your Instantel Measuring Instruments, check the following: 1. Ensure the geophone is connected. 2. Check that the geophone is level from left to right. 3. If the geophone moved during the Sensor Check, press the Sensor Check key again, being careful not to touch the geophone. 4. Inspect the geophone cable for cuts, crimps, or damage and ensure it is properly connected. 5. If the problem persists, the geophone may be damaged and should be checked by an authorized Instantel service facility.
Z
Zachary WalkerSep 7, 2025
How to fix Vertical channel fails sensor check in Instantel Measuring Instruments?
- J
  Jennifer ObrienSep 7, 2025
  If the Vertical channel fails the sensor check on your Instantel Measuring Instruments, check the following: 1. Ensure the geophone is connected. 2. Check if the geophone is upside down, not level side to side, or not level back to front. 3. If the geophone moved during the Sensor Check, press the Sensor Check key again, being careful not to touch the geophone. 4. Inspect the geophone cable for cuts, crimps, or damage and ensure it is properly connected. 5. If the problem persists, the geophone may be damaged and should be checked by an authorized Instantel service facility. 6. If you have a ceiling installation, make sure the blue plastic is next to the ceiling and not the aluminum base.
J
James KnightSep 9, 2025
What to do if Microphone fails the sensor check on Instantel Micromate Measuring Instruments?
- W
  wendy18Sep 9, 2025
  If the Microphone fails the sensor check on your Instantel Measuring Instruments, first, connect the microphone. If the issue persists, the microphone or microphone cable may be damaged, and you should have it checked by an authorized Instantel service facility.
K
Kristen MooreSep 12, 2025
How to solve Blastware is not able to communicate with the Micromate Instantel Measuring Instruments?
- D
  Darlene ChaseSep 12, 2025
  If Blastware is unable to communicate with your Instantel Micromate, ensure the correct unit type has been selected in the bottom left of the Blastware window. Also, make sure you are using Blastware version 10.7 or higher, and that the communication cable is not damaged.
B
bakersusanSep 12, 2025
Why Save icon is not available with a memory stick inserted in Instantel Micromate Measuring Instruments?
- K
  kwrightSep 12, 2025
  If the Save icon is not available with a memory stick inserted into your Instantel Measuring Instruments, reformat the memory stick to Fat 16 or FAT 32. If that doesn't work, remove and reinsert the memory stick.
Z
zachary20Sep 14, 2025
Why Printer icon is not available when printer is connected to Instantel Micromate Measuring Instruments?
- T
  Traci WillisSep 14, 2025
  If the Printer icon is not available when the printer is connected to your Instantel Measuring Instruments, ensure the proper printer is connected, the printer is powered on, and the printer cable is undamaged and properly connected.

Instantel Micromate Specifications

General

Resolution	24-bit
Connectivity	USB, Bluetooth
Power	External DC power supply
Memory	128 MB internal flash memory
Operating Temperature	-10°C to +50°C
Interface	USB
Compliance	CE
Sampling Rate	Up to 20 kHz

Instantel Micromate Release Notes

Table of Contents

Other manuals for Instantel Micromate

Questions and Answers:

Instantel Micromate Specifications