Inswan INS-3 - Focus and Brightness Adjustment; Image Orientation and Supplemental Illumination

8
ENG
Adjusting focus
Adjust brightness
Change image orientation
G
H
I
Set the focus mode to AF-C (AutoFocus Connuous) to lm moving objects
or AF-S (AutoFocus Single) for stac objects.
Pressing the Auto Focus buon will automacally adjust to opmal focus
one me.
You can also trigger the autofocus funcon via the Documate applicaon.
Use the Brightness buon to increase or decrease brightness.
If your image appears upside-down, press and hold the AF buons for 2
seconds to ip the image orientaon. You can also ip or rotate the screen
image in the Documate applicaon.
For more advanced operaon, please visit our official site at www.inswan.com.
2 sec.
2 sec.