12.5 Server Services
12.5.1 Setting up DNS Forwarding
You may use the EBW-E100 as DNS relay server. If it is configured as DNS server
at the locally connected network devices, it will either forward the DNS requests to
the previously configured DNS servers in the Internet, or will use the DNS server
sent during the connection establishment. If IP addresses are combined with host
names in the local host table ("Basic Settings" menu, "Host names" page), these
will be processed first.
Configuration via web interface (menu "Server services", page "DNS")
In order to disable the DNS relay, uncheck the checkbox "Activate DNS
relay".
In order to specify further optional DNS servers, enter the IP addresses of
the according name servers in the entry fields "First DNS server address"
or "First IPv6 DNS server address" and "Second DNS server address" or
"Second IPv6 DNS server address".
Save your settings by clicking "OK".
To Next Page
Loading...