DPS-5.4
dvdfw_ sp501
b3aa1306.sz0
Next step.
Please continue work ID number and ID data set up.
b3aa1306.sz0
UPGRADE FIRMWARE-2
Using for Window tool
1. Prepare three data on a hard disk of the personal computer.
2. Start the UFU.exe file.
3. Select "Easy" mode.
4. Select "File Selection" mode.
5. Select a program file and open the file.
9. Wait for about 10 minutes.
10. Complete the upgrade firmware.
Writing the firmware as below.
1
Loader file
UFU setting file
UFU witting file
Double click the UFU.exe.
6. Connect the JIG (0J13), FFC and
connection cable (RS-232C straight type).
7. Turn the power switch and standby "ON" of the DV-SP501.
No disc condition.
8. Press the start key.
To Next Page
Loading...
