122
Front Panel≫ Rear Panel≫ Remote≫
Contents
≫
Connections
≫
Playback
≫
Setup
≫
Setting Item Default Value Setting Details
AirPlay Password
You can set a password of up to 31 digits so that
only registered users can use AirPlay
®
.
1.
Press Enter to display the Edit screen.
2. Select a character or symbol with the cursors,
and press Enter.
Repeat this operation to input up to 31 characters.
"A/a": Switches between upper and lower cases.
(Pressing Mode on the remote controller also
toggles between upper and lower cases)
"←" "→": Moves the cursor in the arrow direction.
" ":
Removes a character on the left of the cursor.
" ": Enters a space.
• To select whether to mask the password with
"*" or display it in plain text, press Memory on
the remote controller.
• Pressing Clear on the remote controller will
remove all the input characters.
3. After inputting, select "OK" with the cursors, and
press Enter.
The input password will be saved.
Usage Data No To improve the quality of our products and services,
we may collect information about your usage via a
network. Select "Yes" if you agree to our collecting
this information. Select "No" if you do not want us
to collect this information.
• You can set this after conrming the Privacy
Policy. When you select "Usage Data" and press
Enter, the Privacy Policy is displayed.
(The same screen is displayed only once while
setting the network connection.) If you agree to
the collection of the information, this setting also
becomes "Yes". Note that if you select "No" for
this setting after you agree to the Privacy Policy,
the information will not be collected.
Network Check - You can check the network connection.
Press Enter when "Start" is displayed.
• Wait for a while if "Network" cannot be selected. It can be selected when the network
function is activated.
3. Bluetooth
Change the settings for the Bluetooth function.
Setting Item Default Value Setting Details
Bluetooth On Select whether or not to use the BLUETOOTH
function.
"On": Enables connection with a BLUETOOTH-
enabled device by using the BLUETOOTH
function. Select "On" also when making various
BLUETOOTH settings.
"O": When not using the BLUETOOTH function
Auto Input
Change
On The input of the unit can be automatically switched
to "BLUETOOTH" when connection is made from
a BLUETOOTH-enabled device to the unit.
"On": The input is automatically set to
"BLUETOOTH" when a BLUETOOTH-enabled
device is connected.
"O": The function is disabled.
• If the input is not switched automatically, set this
to "O", and change the input manually.
Auto Reconnect On This function automatically reconnects to the
BLUETOOTH-enabled device connected last
when you change the input to "BLUETOOTH".
"On": When this function is used
"O": When this function is not used
• This may not work with some BLUETOOTH-
enabled devices.
Pairing
Information
- You can initialize the pairing information stored on
this unit.
Pressing Enter when "Clear" is displayed initializes
the pairing information stored on this unit.
• This function does not initialize the pairing
information on the BLUETOOTH-enabled
device. When pairing the unit again with the
device, be sure to clear the pairing information
on the BLUETOOTH-enabled device
beforehand. For information on how to clear
the pairing information, refer to the instruction
manual of the BLUETOOTH-enabled device.
To Next Page
Loading...
Need help?
General
