EasyManuals Logo

Integra DRX-4.2 User Manual

Integra DRX-4.2
179 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #126 background imageLoading...
Page #126 background image
126
Front Panel Rear Panel Remote
Contents
Connections
Playback
Setup
1. Input/Output Assign
1. TV Out / OSD
Make settings for TV output and On-Screen Displays (OSD) that appear on the
TV.
Setting Item Default Value Setting Details
HDMI Out MAIN Select the HDMI jack to be connected with the TV.
"MAIN": When connecting the TV to the HDMI OUT
MAIN jack
"SUB": When connecting the TV to the HDMI OUT
SUB jack
"MAIN+SUB": When connecting to both the MAIN
and SUB jacks
Dolby Vision MAIN To output Dolby Vision video from the player to
a TV that supports Dolby Vision, select either
the HDMI OUT MAIN jack or HDMI OUT SUB
jack to which the Dolby Vision-supported TV is
connected. This setting is only necessary if you
have set "HDMI Out" to "MAIN+SUB" and you have
connected a TV to both the MAIN and SUB jacks.
"MAIN": To output Dolby Vision video to a Dolby
Vision-supported TV connected to the HDMI OUT
MAIN jack.
"SUB": To output Dolby Vision video to a Dolby
Vision-supported TV connected to the HDMI OUT
SUB jack.
After selecting "MAIN" or "SUB", if the video on
the TV does not appear correctly, set this to "O󰀨".
Zone 2 HDMI Not Use Make the setting when you output to the Zone 2 TV
connected to the HDMI OUT ZONE 2/SUB jack.
"Use": Enable this function
"Not Use": Disable this function
HDBaseT(TM) Not Use Set when outputting the input signals from the
HDBaseT port via an LAN cable.
"MAIN": When connecting the HDMI OUT MAIN
jack and the HDBaseT IN port
"SUB / ZONE 2": When connecting the HDMI OUT
SUB/ZONE 2 jack and the HDBaseT IN port
Setting Item Default Value Setting Details
OSD Language English Select the on-screen display language from the
following.
English, German, French, Spanish, Italian, Dutch,
Swedish, Russian, Chinese
Impose OSD On Set whether or not to display information such as
volume adjustment or switching of input on the TV
screen.
"On": OSD is displayed on the TV.
"O󰀨": OSD is not displayed on the TV.
OSD may not be displayed depending on the
input signal even if "On" is selected. In this case,
change the resolution of the connected device.
Mini Player OSD Always On You can display on the TV the images from another
input selected last while playing the audio from
NET input. After switching the input to NET, play the
images and audio. And then when you press Mode
on the remote controller, the image is displayed in
full-screen mode, and the audio information (Mini
Player) for NET is displayed in the corner of the
screen. You can set whether to always display this
Mini Player on the screen.
"Always On": The Mini Player is always displayed.
"Auto O󰀨": The Mini Player turns o󰀨 automatically
in 30 seconds after displayed. If operation such as
changing the volume is performed, it is displayed
again for 30 seconds.
Each time the Mode button is pressed, the image
display/non-display can be switched.
This setting cannot be selected if "Impose OSD"
is set to "O󰀨".
Screen Saver 3 minutes Set the time to start the screen saver.
Select a value from "3 minutes", "5 minutes",
"10 minutes" and "O󰀨".

Table of Contents

Other manuals for Integra DRX-4.2

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Integra DRX-4.2 and is the answer not in the manual?

Integra DRX-4.2 Specifications

General IconGeneral
BrandIntegra
ModelDRX-4.2
CategoryStereo Receiver
LanguageEnglish

Related product manuals