Integra DRX-4.2 - Page 150

150
Front Panel≫ Rear Panel≫ Remote≫
Contents
≫
Connections
≫
Playback
≫
Setup
≫
Setting Item Default Value Setting Details
STRM BOX Main/Zone 2/
Zone 3
Set the 12V trigger output setting to each input.
"O󰀨": No output
"Main": Output when "STRM BOX" is selected as
input for main room.
"Zone 2": Output when "STRM BOX" is selected as
input for ZONE2.
"Main/Zone 2": Output when "STRM BOX" is
selected as input for main room or ZONE2.
"Zone 3": Output when "STRM BOX" is selected as
input for ZONE3.
"Main/Zone 3": Output when "STRM BOX" is
selected as input for main room or ZONE3.
"Zone 2/Zone 3": Output when "STRM BOX" is
selected as input for ZONE2 or ZONE3.
"Main/Zone 2/Zone 3": Output when "STRM BOX"
is selected as input for main room, ZONE2 or
ZONE3.
PC Main/Zone 2/
Zone 3
Set the 12V trigger output setting to each input.
"O󰀨": No output
"Main": Output when "PC" is selected as input for
main room.
"Zone 2": Output when "PC" is selected as input for
ZONE2.
"Main/Zone 2": Output when "PC" is selected as
input for main room or ZONE2.
"Zone 3": Output when "PC" is selected as input for
ZONE3.
"Main/Zone 3": Output when "PC" is selected as
input for main room or ZONE3.
"Zone 2/Zone 3": Output when "PC" is selected as
input for ZONE2 or ZONE3.
"Main/Zone 2/Zone 3": Output when "PC" is
selected as input for main room, ZONE2 or ZONE3.
Setting Item Default Value Setting Details
AUX Main/Zone 2/
Zone 3
Set the 12V trigger output setting to each input.
"O󰀨": No output
"Main": Output when "AUX" is selected as input for
main room.
"Zone 2": Output when "AUX" is selected as input
for ZONE2.
"Main/Zone 2": Output when "AUX" is selected as
input for main room or ZONE2.
"Zone 3": Output when "AUX" is selected as input
for ZONE3.
"Main/Zone 3": Output when "AUX" is selected as
input for main room or ZONE3.
"Zone 2/Zone 3": Output when "AUX" is selected as
input for ZONE2 or ZONE3.
"Main/Zone 2/Zone 3": Output when "AUX" is
selected as input for main room, ZONE2 or ZONE3.
CD Main/Zone 2/
Zone 3
Set the 12V trigger output setting to each input.
"O󰀨": No output
"Main": Output when "CD" is selected as input for
main room.
"Zone 2": Output when "CD" is selected as input for
ZONE2.
"Main/Zone 2": Output when "CD" is selected as
input for main room or ZONE2.
"Zone 3": Output when "CD" is selected as input for
ZONE3.
"Main/Zone 3": Output when "CD" is selected as
input for main room or ZONE3.
"Zone 2/Zone 3": Output when "CD" is selected as
input for ZONE2 or ZONE3.
"Main/Zone 2/Zone 3": Output when "CD" is
selected as input for main room, ZONE2 or ZONE3.