To Next PageTo Next Page
Need help?Do you have a question about the Integra DRX-5 and is the answer not in the manual?
General| IMAX Enhanced | Yes |
|---|---|
| Roon Tested | Yes |
| Dirac Live | Yes |
| eARC | Yes |
| Bluetooth | Yes |
| Phono Input | Yes |
| HDMI Inputs | 7 |
| HDMI Outputs | 3 |
| Audio Formats Supported | Dolby Atmos, DTS:X, IMAX Enhanced |
| Network Connectivity | Ethernet, Wi-Fi |
| THX Certified | Yes |
| HDR Support | HDR10, Dolby Vision, HLG |
| Zone 2 | Yes |
| Zone 3 | Yes |
| Input Sensitivity/Impedance | 200 mV/47 k-Ohms (Line) |
| Signal-to-Noise Ratio | 106dB |
| USB Port | Yes |
Turns the unit on or into standby mode.
Indicates when features like HDMI Standby Through are active in standby.
Selects the HDMI OUT jack for video signal output.
Receives signals from the remote controller.
Adjusts bass and treble sound quality for front speakers.
Shows information about the unit's status and settings.
Selects the audio listening mode for playback.
Adjusts the brightness of the unit's display.
Used to register AM/FM radio stations for quick access.
Switches between automatic and manual tuning modes for radio.
Switches the information displayed on the unit.
Displays the unit's setup menu for configuration.
Navigate menus and confirm selections during setup and operation.
Returns to the previous screen or state in menus.
Adjusts the overall volume level of the audio output.
Controls the multi-zone audio playback feature.
Enables playback of the same source in all connected zones simultaneously.
Connect stereo headphones for private listening.
Connects the supplied microphone for speaker setup and calibration.
Selects the audio/video input source for playback.
Connects video cameras or other devices via HDMI.
Input TV or AV component digital audio signals via optical or coaxial cables.
Connect the supplied antennas to the AM/FM terminals.
Input video signals from AV components using an analog video cable.
Connect USB storage devices for music playback or power supply.
Connect to the network using an Ethernet cable for network functions.
Input video signals from AV components with a component video cable.
Transmit video and audio signals via HDMI cable to a monitor.
Transmit video and audio signals via HDMI cable to an AV component.
HDMI input signals are output via the Ethernet cable for HDBaseT connection.
For connection to a home control system.
Connect the supplied power cord to the AC inlet.
Connect the ground wire of a turntable.
Input TV or AV component audio signals with an analog audio cable.
Connect speakers using speaker cables for main and separate rooms.
Output audio signals to a pre-main or power amplifier in Zone 3.
Output audio signals to a pre-main or power amplifier in Zone 2.
Connect a powered subwoofer to this jack.
Connect a power amplifier to these jacks.
Connect a multiroom remote control kit.
Enable link operation between devices with 12V trigger input.
Turns the unit on or into standby mode.
Switches the input to be played.
Perform common settings on the TV screen.
Select items with cursors and press Enter to confirm.
Displays the Setup menu.
Adjusts the volume and cancels muting.
Temporarily mutes audio; press again to cancel.
Selects the listening mode.
Controls the multi-zone function.
Start playback from Music Server or USB.
Start repeat or random play of Music Server or USB.
Deletes characters entered when inputting text on the TV screen.
Adjusts display brightness in three steps.
Switches the information displayed on the unit.
Returns the display to the previous state.
Switches tuning to AM/FM station between auto and manual.
Used to register AM/FM radio stations.
Displays the output channel corresponding to the selected listening mode.
Lights indicate headphone use, zone status, network connection, or USB device status.
Lights indicate the type of input digital audio signals and listening mode.
Lights indicate RDS, TUNED, FM stereo, sleep timer, or auto standby status.
Flashes when muting is on.
Displays various information about input signals, using asterisks for unknown characters.
Adjusts volume based on DialogNorm values for consistent loudness.
Lights when the NET input selector is active, enabling remote cursor operations.
Guides you through initial setup procedures via on-screen instructions.
Calibrates speaker settings for optimal sound based on room acoustics.
Enables control of CEC-compatible devices linked via HDMI.
Allows AV devices to pass signals to the TV even when the unit is in standby.
How to select input sources and adjust volume for basic listening.
Bypasses sound processing for a more direct audio signal.
Selects audio modes like Dolby Surround, DTS Neural:X, or THX modes.
Select appropriate modes for Dolby Digital or DTS encoded audio signals.
Utilizes THX technologies for an immersive cinema-like sound experience.
Options like All Ch Stereo or Orchestra for specific audio genres.
Access internet radio, Music Server, and AirPlay for network audio streaming.
Listen to TuneIn or other pre-recorded network radio stations.
Play music files from a connected USB storage device.
Play music files stored on a networked PC or NAS device.
Control and play audio in a second or third room using the remote.
Play the same source simultaneously in all connected zones.
Configure multi-zone settings in the setup menu for proper operation.
Enhance or moderate bass and treble for front speakers.
Adjust frequently used settings like sound quality via on-screen menus.
Troubleshoot erratic operation by restarting the unit.
Restore factory default settings if problems persist.
Identifies buttons and jacks on the front of the unit.
Details all input and output connection ports on the rear.
Illustrates the functions of each button on the remote controller.
Explains the meaning of various indicators on the unit's display.
Information regarding Dolby trademarks and licensing.
Information regarding DTS trademarks and licensing.
Information regarding THX certifications and trademarks.
Information regarding compatibility and trademarks for Apple devices.
Information regarding Windows trademarks and licensing.
