Do you have a question about the Integra DRX-2 and is the answer not in the manual?
Channels | 7.2 |
---|---|
HDMI Inputs | 6 |
HDMI Outputs | 2 |
Audio Formats | Dolby Atmos, DTS:X, Dolby TrueHD, DTS-HD Master Audio |
Room Calibration | AccuEQ |
Power Output | 80 W/Ch (8 Ohms, 20 Hz–20 kHz, 0.08% THD, 2 Channels Driven) |
Network Connectivity | Wi-Fi, Ethernet |
Streaming Services | Spotify, TIDAL, Deezer, TuneIn |
Dimensions | 435 x 160 x 328 mm |
THD+N (Total Harmonic Distortion + Noise) | 0.08% (20Hz-20kHz, 8 Ohms) |
Input Sensitivity and Impedance | 200mV/47k Ohms |
Frequency Response | 10Hz-100kHz (+1dB, -3dB) |
Signal-to-Noise Ratio | 106 dB (Line, IHF-A) |
Speaker Impedance | 4-16 Ohms |
Video Input Sensitivity/Output Level and Impedance | 1Vp-p/75 Ohms |
Component Video Frequency Response | 5 Hz-100 MHz/+0 dB, -3 dB |
HDMI Support | 4K/60 Hz, HDR10, Dolby Vision |
Video Inputs | 2 Component, 2 Composite |
Video Outputs | 1 Component, 1 Composite |
Total Harmonic Distortion | 0.08% (20Hz-20kHz, 8 Ohms) |
Input Sensitivity | 200mV/47k Ohms (Line) |
Guides for selecting speaker configurations like 5.1-channel systems.
Detailed instructions on connecting various speaker types to the AV receiver.
Connecting the TV, including setup for the Audio Return Channel (ARC) feature.
Connecting various AV components via HDMI and other interfaces.
Configuring audio output for a second zone or separate room.
Connecting antennas, network cables, and power cords.
First-time power-on sequence and guided setup process.
Configuring HDMI CEC, Standby Through, and other HDMI features.
Connecting the unit to a network via Wi-Fi or wired LAN.
Setting up audio output and control for a separate room (Zone 2).
Enabling the TV's audio return channel for sound playback.
Controlling playback of connected AV components and adjusting volume.
Choosing sound modes like Dolby Surround, DTS Neural:X, and original surround modes.
Accessing internet radio, music servers, and USB playback.
Streaming music wirelessly from Apple devices.
Pairing and playing audio from Bluetooth-enabled devices.
Listening to radio, multi-zone control, and sound adjustments.
Detailed description of buttons, displays, and jacks on the front panel.
Overview of all input, output, and connection jacks on the rear panel.
Explanation of buttons and their functions on the remote control.
Understanding the symbols and information shown on the unit's display.