En-9
Getting to Know the Receiver—Continued
For detailed information, see the pages in parentheses.
a button (12, 18, 46)
b Input Selector buttons (18, 19, 22, 23, 38, 39,
46)
c Control buttons (38, 39)
d Repeat button (38, 39)
e List button
f Arrow []/[]/[]/[] and Enter buttons (12,
23, 38, 39, 40, 45)
g Setup button (12, 40, 45)
h CH/Album buttons (24, 38, 39)
i Volume / buttons (19, 46)
j Number buttons (23, 24, 39)
k
>
10/Caps/D.TUN button (24)
l Display button (25, 38, 39)
m Dimmer button (20)
n Remote Mode buttons (9, 39, 46)
o Mode button (38, 39)
p Random button (38, 39)
q Menu button (39)
r Return button (38, 39, 40)
s Audio button (21)
t Muting button (19, 46)
u CLR button (24)
v Sleep button (20)
Remote Controller
Using the Remote Mode buttons
You can use this remote
controller’s Zone 2 capability to
control a Zone 2 device. To
control a Zone 2 device, start by
pressing the Remote Mode [Zone2] button. After
you’ve finished operating the Zone 2 device, and
would like to operate this receiver once again, press
the Remote Mode [Main] button.
If the expected operation does not occur even though
the remote controller is pointed toward the receiver, it
may be that Zone 2 is selected. Please press the
Remote Mode [Main] button. Once you’ve pressed
the Remote Mode [Main] button, there’s no need to
press this button again before each operation; you can
simply use the remote controller to operate the
receiver as usual. Similarly, once you’ve pressed the
Remote Mode [Zone2] button, you can continue
operating the Zone 2 device without having to press
this button again before each operation.
To Next Page
Loading...
Need help?
General
