Need help?Do you have a question about the Integra DTR-30.3 and is the answer not in the manual?
General| Audio Channels | 7.2 |
|---|---|
| HDMI Outputs | 1 |
| Weight | 23.1 lbs (10.5 kg) |
| HDMI Inputs | 6 |
| Network Connectivity | Ethernet |
| Streaming Services | Pandora |
| Multi-Room Audio | Yes |
| Frequency Response | 10Hz - 100kHz |
| Total Harmonic Distortion | 0.08% |
| Input Sensitivity/Impedance | 200mV/47kΩ |
| Video Inputs/Outputs | Component |
| Audio Inputs/Outputs | Analog |
| Dimensions (W x H x D) | 435 x 173 x 379 mm |
Table for setting speaker channels based on the number of speakers used.
Important warnings and tips for connecting speakers correctly.
How to assign HDMI inputs to input selectors for component connection.
Explanation of the ARC function for sending TV audio to the receiver.
Mapping of AV receiver jacks and ports to various audio/video components.
How to play audio/video from connected source components.
Instructions for controlling playback of content from USB or network devices.
Steps for connecting and playing music/video files from an iPod/iPhone using the USB port.
How to play music files stored on a USB device.
Instructions for connecting to the network and listening to internet radio stations.
How to add and listen to custom internet radio stations.
Steps to play music files stored on a computer or media server via network.
Configuration steps for Windows Media Player for network media playback.
How to play media remotely using Windows Media Player.
Procedures for tuning into AM/FM stations using auto or manual modes.
How to store favorite radio stations as presets for quick access.
Options and procedures within the Audyssey 2EQ auto setup menu.
Common error messages encountered during speaker setup and their solutions.
How to manually adjust speaker settings after automatic calibration.
How to select different listening modes for various audio sources.
Quick access to frequently used settings via the Home menu.
Instructions on how to record audio and video from various sources.
How to set speaker distances and calibrate speaker levels for optimal sound.
How to enable and configure Audyssey sound optimization features.
How to configure network settings like DHCP, IP address, and DNS server.
Steps for updating the AV receiver's firmware via network or USB.
Adjusting individual speaker levels and managing Audyssey sound features.
Methods for connecting Zone 2 speakers directly or via an external amplifier.
Solutions for issues like the receiver not turning on or turning off unexpectedly.
Solutions for problems like no sound, quiet sound, or incorrect speaker output.
Solutions for issues where only specific speakers produce sound or no sound.
Solutions for problems related to no picture output or unstable video signals.
Steps for updating the receiver's firmware using a wired internet connection.
Steps for updating the receiver's firmware using a USB flash drive.
Step-by-step guide for setting up HDMI connections.
To Next Page
