26
Dolby
Make the settings for Dolby listening mode.
Setting Item Default Value Setting Details
PLIIx Music (2ch
Input)
Panorama
Off Adjust the sound field setting for playing any 2
ch digital source such as Dolby Digital or 2 ch
analog/PCM source in the Dolby Pro logic II
Music listening mode. Select the width of sound
field.
"On": Width of sound field will be increased.
"Off": Default value
PLIIx Music (2ch
Input)
Dimension
0 Adjust the sound field setting for playing any 2
ch digital source such as Dolby Digital or 2 ch
analog/PCM source in the Dolby Pro logic II
Music listening mode. Select the depth of sound
field.
"-3" to "+3": The sound field shifts forward as
the set value becomes smaller than "0" and
backward if the set value become larger than
"0".
PLIIx Music (2ch
Input)
Center Width
3 Configure the setting to use for playing any 2
ch digital source such as Dolby Digital, or 2-ch
analog/PCM source in the Dolby Pro logic II
Music listening mode. Adjust the width of the
sound from the center speaker).
"0" to "7": The smaller the setting value is, the
more concentrated in the center speaker is
the sound, while the larger the setting value is,
the more distributed to the front left and right
speakers is the sound of the center speaker.
PLIIz Height Gain Mid Adjust the output level of the height speakers in
the Dolby Pro Logic IIz Height listening mode.
The output of the height speakers will be
enhanced in the order of "Low", "Mid" (Middle),
"High": "Low", "Mid" and "High".
• The setting cannot be changed if "Height" is
set to "None" in "Speaker Configuration".
Setting Item Default Value Setting Details
Dolby EX
Dolby EX
Manual The Dolby Digital EX listening mode will
automatically be selected when Dolby EX
signals are input.
"Auto": Use this function
"Manual": Select the desired listening mode
• The setting cannot be changed if "Back" is
set to "None" in "Speaker Configuration".
Loudness
Management
On Enable the Late Night function that allows
you to enjoy surround sound of Dolby TrueHD
playback even in low volume.
"On": Use this function
"Off": Do not use this function
• Depending on the setting of "Back" in "Speaker Configuration", the display will be changed. "PLllx" will
be displayed as "PLllx/PLII".
DTS
Make the settings for DTS Neo:6 Music listening mode.
Setting Item Default Value Setting Details
Neo:6 Music
Center Image
2 Adjust the width of the sound field of the front
channel when playing in the DTS Neo:6 Music
listening mode.
"0" to "5": Selecting a smaller value brings the
sound field of the front channel to the center
while selecting a larger value spreads the sound
field of the front channel to left and right.
Theater-Dimensional
Make the settings for Theater-Dimensional mode.
Setting Item Default Value Setting Details
Listening Angle Wide Set the angle of the front left and right speakers
relative to the listening position when playing in
the Theater-Dimensional listening mode.
"Narrow": Less than 30°
"Wide": Greater than 30°
• Values recommended for "Listening Angle" are: 20° when "Narrow" is selected and 40° when "Wide"
is selected.
To Next Page
Loading...
Need help?
General
