Integra DTR-8.3 User Manual

53
Input Setup
Relationship between input source and listening mode
Listening modes marked with the “●” can be selected. For columns that list a number of listening modes, the display will correspond to the
format of the signal from the source media.
Input source signal (display) a. Analog/PCM b. PCM fs=96k c. Dolby D d. DTS e. D.F.2ch f. D.F.Mono
(2ch) (2ch) (Digital Format (Digital Format
Multichannel) Multichannel) (Digital Format 2ch) (Digital Format Mono)
Type of software Tape, Video tape, DVD DVD CD, LD DVD DVD
Vinyl, Tuner, CD, (96 kHz/24 bit) Digital Satellite DVD Digital Satellite
MD, DVD (Stereo),
LD, Digital Satellite
Listening Mode
Mono ● ●●
Direct/Pure Audio ●●
Stereo ●●●●●
*1
T-D (Theater-Dimensional) ●●●●
Dolby Digital ●●
*2
●
*2
DTS DTS
DTS-ES Matrix 6.1
●
*3
●
*3
DTS-ES Discrete 6.1
DTS 96/24
Dolby EX Dolby Digital EX
Dolby Pro Logic II PL II Movie PL II Movie PL II Movie
DTS Neo:6 PL II Music PL II Music PL II Music
DTS Neo:6 Cinema DTS Neo:6 Cinema
DTS Neo:6 Music DTS Neo:6 Music
THX THX Cinema THX Cinema THX Cinema THX Cinema
THX Surround EX
Mono Movie ● ●●
Enhanced 7 ●●●●
Orchestra ●●●●
Unplugged ●●●●
Studio-Mix ●●●●
TV Logic ●●●●
All Ch Stereo ● ●
*1 When playing sources recorded in DTS 96/24 format, “DTS 96/24 Stereo” is displayed.
*2 Enables for Dolby Digital input sources.
*3 Enables for DTS input sources.
Note:
You may not be able to select all the listening modes shown here depending on your speaker configuration or the selected input source.

Integra DTR-8.3 Specifications

General

Brand	Integra
Model	DTR-8.3
Category	Receiver
Language	English