Need help?Do you have a question about the Integra DTR-5.8 and is the answer not in the manual?
Covers warnings about fire, electric shock, moisture, ventilation, and proper usage.
Details conditions under which the apparatus requires servicing by qualified personnel.
Advises against inserting objects into openings and placing liquids on the unit.
Ensuring correct AC voltage and power cord accessibility for safe operation.
Identifies the controls and indicators on the front panel for both models.
Details digital audio inputs (Optical/Coaxial) and antenna connectors.
Covers HDMI, Monitor Out, IR, Trigger, RS232, and Zone 2 connections.
Details component, CD, Tape, Game/TV, VCR, and DVD input/output connectors.
Step-by-step instructions for inserting batteries into the remote control.
Guidance on proper aiming and placement for reliable remote operation.
Table for speaker setup and instructions for connecting a powered subwoofer.
Advice on impedance, polarity, cable handling, and avoiding shorts.
Detailed instructions for stripping speaker wires and connecting terminals.
Setting the HDMI monitor option to 'Yes' for menu display via HDMI.
Step-by-step instructions for connecting video and audio to a TV or projector.
Steps for connecting a DVD player's video and audio outputs to the receiver.
Steps for connecting a VCR or DVD recorder for playback through the receiver.
Steps for connecting a VCR or DVD recorder for recording audio and video.
Steps for connecting satellite, cable, or set-top box receivers.
Steps for connecting game consoles' video and audio outputs to the receiver.
Explains how video and audio signals travel through HDMI connections.
Explains the Audyssey 2EQ function for automatic speaker setup.
Completing the Audyssey 2EQ measurement process.
Options to review speaker configuration, distance, levels, and save settings.
Explains common errors like ambient noise, speaker detection, and write errors.
How to check and verify speaker setup results after calibration.
Setting HDMI monitor option to 'Yes' to display menus via HDMI.
Steps to assign HDMI IN 1 or 2 to specific input selectors.
Steps to assign component video inputs (IN 1-3) to specific input selectors.
Steps to assign digital inputs (Optical/Coaxial) to input selectors.
How to select an input source and start playback on the source component.
How to store up to 40 AM/FM stations as presets.
Settings for speaker presence, crossover frequencies, and subwoofer settings.
Configuring distances for accurate sound staging and timing.
Calibrating speaker volume levels using test tones for balanced output.
Adjusting the equalizer settings (EQ) for individual speakers.
Assigning default listening modes to input sources like DVD, Tuner, etc.
Correcting audio and picture sync issues, typically for DVD players.
Connecting Zone 2 speakers directly or via an external amplifier.
Activating the ZONE 2 SPEAKERS terminals for Zone 2 audio output.
Basic operation for turning Zone 2 on/off and selecting audio sources.
Programming the remote to control third-party AV components.
Resolving issues where the receiver won't turn on or turns off automatically.
Diagnosing problems like no sound, quiet audio, or specific speaker silence.
Addressing surround back, subwoofer, center speaker, and signal format issues.
Resolving HDMI audio sync, no picture, and video connection issues.
Troubleshooting remote control issues and controlling external components.
Configuring the receiver's tuner mode to select SIRIUS Satellite Radio.
Methods for selecting channels: Search, Category, and Direct Tuning.
Procedures for setting up and changing the PIN for channel lock.
Configuring the receiver's tuner mode to enable XM Satellite Radio.
Storing and accessing favorite XM channels as presets.
To Next Page
General
