Integra DTR-5.8 - Listening Modes for DTS Sources

62
Using the Listening Modes—Continued
DTS and DTS 96/24 Sources
*1. If there are no surround back speakers, or Powered Zone 2 is being used, DTS is used.
*2. If there are no surround back speakers, or Powered Zone 2 is being used, Dolby Pro Logic II is used.
*3. Available only when using surround speakers.
*4. For T-D, Mono Movie, Orchestra, Unplugged, Studio-Mix, and TV Logic, DTS 96/24 is processed as DTS.
: Requires 6.1/7.1 speakers. Not available while Powered Zone 2 is being used.
: Requires 7.1 speakers. Not available while Powered Zone 2 is being used.
Source format
DTS, DTS 96/24
DTS Discrete/MatrixMultichannel
2ch 1/0
*/2 except */2
Media
Listening mode
DVD, CD, etc. DVD, CD, etc.
Direct
✔✔✔✔ ✔
Stereo
✔✔✔✔ ✔
Multichannel
Dolby D
Dolby Digital Plus
DTS, DTS 96/24
✔✔ ✔
DTS Discrete/Matrix
✔
*1
DTS-HD High Resolution
Audio
DTS-HD Master Audio
TrueHD
Dolby PLII Movie/
Dolby PLIIx Movie
*2
✔ ✔
Dolby PLII Music/
Dolby PLIIx Music
*2
✔ ✔
Dolby PLII Game/
Dolby PLIIx Game
*2
✔
Dolby Digital EX/Dolby EX
✔
Neo:6
✔
Neo:6 Cinema
✔
Neo:6 Music
✔
Neural Surround (North
American model only)
Mono
✔✔✔✔ ✔
Onkyo Original DSP
*4
Mono Movie
*3
Orchestra
*3
Unplugged
*3
Studio-Mix
*3
TV Logic
*3
✔✔✔✔ ✔
All Ch Stereo
Full Mono
✔✔✔✔ ✔
T-D
✔✔✔✔ ✔
Tip: To check the format of the digital input signal, see “Displaying Source Information” on page 55.