Need help?Do you have a question about the Integra DTR-50.5 and is the answer not in the manual?
General| Channels | 7.2 |
|---|---|
| Power Output | 100 Watts per channel (8 ohms) |
| HDMI Inputs | 6 |
| HDMI Outputs | 2 |
| Network Connectivity | Ethernet, Wi-Fi |
| Dimensions (W x H x D) | 17.1 x 6.6 x 15.4 inches |
| Weight | 25.2 lbs |
| Frequency Response | 10 Hz - 100 kHz |
| 4K Passthrough | Yes |
| 3D Passthrough | Yes |
| Dolby Atmos | Yes |
| DTS:X | Yes |
| Bluetooth | Yes |
| Phono Input | Yes |
| Zone 2 | Yes |
| Zone 3 | No |
| Frequency Response (Direct mode) | 10 Hz - 100 kHz |
| Network Features | DLNA, AirPlay |
| Audio Formats Supported | Dolby TrueHD, DTS-HD Master Audio, Dolby Atmos, DTS:X |
| Streaming Services | Spotify, TuneIn |
| THD at Rated Power | 0.08% |
| THD | 0.08% |
| Input Sensitivity/Impedance | 200mV/47k ohms |
| Signal-to-Noise Ratio | 100dB |
| Video Inputs/Outputs (Composite) | 2 In / 1 Out |
| Video Inputs/Outputs (Component) | 2 In / 1 Out |
| HDMI Version | 2.0 |
| USB | 1 (Front) |
| Audio Inputs/Outputs (Analog) | 6 In |
| Audio Inputs/Outputs (Phono) | 1 input |
| Audio Inputs/Outputs (Digital Optical) | 2 In |
| Audio Inputs/Outputs (Digital Coaxial) | 2 In |
Critical safety guidelines and precautions for operating the apparatus.
Important notes on usage, care, and handling of the AV receiver.
Guide to connecting speakers, subwoofers, and other AV components.
Steps for powering on, initial setup wizard, Audyssey, and network setup.
Assigning inputs, configuring monitor outputs, and video settings.
Setting up speaker types, impedance, distance, and calibration.
Configuring source settings and using Audyssey dynamic audio features.
Solutions for common problems with operation, audio, video, and connectivity.
Instructions for updating the AV receiver's firmware via network or USB.
To Next Page
